Expected delivery time:
Prices in Euros, excl. 21% VAT.
Main Features:
- Standalone HDD/SSD duplicator, no PC connection or software required.
- Different sanitization options; Quick, Full, Secure and DoD Erase.
- Cable Free SATA connectors for easy placement and swapping of hard disk drives.
- Real-time production status tracking with PC Monitoring.
- iSecuLog Log Report for storing and reviewing production data.
- High speed copy of 9 GB/min (150 MB/s), per port.
Available models:
The U-Reach IT-G series duplicators are professional systems for duplicating and erasing SATA hard disk drives and SSD's. The IT-G HDD duplicators operate stand-alone, no computer or software is required. The unit operates very simple; all functions are controlled through the function keys and the LCD display. Using the "PC Monitoring" function the current status and functioning of the IT-G hard disk drive duplicator can be monitored via a PC. Extensive production information can be stored and consulted with the iSecuLog Log Report software.
The U-Reach IT-G 1-15 hard disk drive duplicator can make fifteen copies of a SATA hard disk drive or SSD simultaneously. The IT-G duplicators offer a maximum copy speed of 9 GB per minute (150 MB/s) on all channels. The speed does not decrease when multiple hard disk drives are connected. The IT-G HDD duplicator offers four different copy functions; "Quick Smart Copy", "All Partitions Copy", "Percentage Copy" and "Whole HDD Copy". The Quick Copy function supports the following formats; FAT16/32, exFAT, NTFS, Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX).
In addition to duplicating, the IT-G duplicator can also be used to erase SATA hard disk drives and SSD's. Four Erase functions are available; "Quick Erase", "Full Erase", "Secure Erase" and "DoD Erase". The DoD Erase function complies with the 5220.22-M US Department of Defense standard.
The U-Reach IT-G series of hard disk drive duplicators offer "Cable Free SATA" connectors. 1.8"/2.5"/3.5" SATA hard disk drives and SSD's can be connected directly to the SATA connectors of the IT-G duplicator.
- Standalone SATA HDD/SSD eraser, no PC connection or software required.
- Erase multiple SATA disk drives at the same time.
- Maximum copy speed up to 9 GB per minute, per SATA port.
- Maximum copy speed up to 9 GB per minute, per SATA port.
- Cable Free SATA connectors.
- Cable Free SATA connectors.
- Real-time PC monitoring function.
- Real-time PC monitoring function.
- iSecuLog Log Report Management function.
- iSecuLog Log Report Management function.
- Quick Copy function for Windows, Linux and Mac.
- Quick Copy function for Windows, Linux and Mac.
- Supports Advanced Format HDD (15 TB+) and GPT, MRB table format.
- Complete set of sanitization options; Quick, Full and DoD Erase.
- Complete set of sanitization options; Quick, Full and DoD Erase.
- Optional adapters for IDE, mSATA SSD, microSATA, eSATA and iVDR.
- Optional adapters for IDE, mSATA SSD, microSATA, eSATA and iVDR.
- Whole HDD Copy supports all formats through bitwise duplication.
- Easy operation with buttons and LCD display.
- Open Platform design for easy media exchange.
- Interchangeable HDD port modules for easy maintenance.
Maximum copy speed
Cable Free SATA
Real-time PC monitoring
iSecuLog Log Report
Quick Copy functie
Sanitization
Optional adapters
U-Reach SATA duplicators are able to simultaneously duplicate at a maximum speed of 9 GB/min to each SATA port. The speed always remains constant, even if the number of media to be duplicated increases.
With "Cable Free SATA" you can simply plug a SSD or HDD (1.8"/2.5"/3.5") directly into each SATA bay connector on the system. No need for extra cables or adapters.
The PC Monitoring function makes it possible to monitor the status and progress of the current process in real-time. The information of each port is shown on the PC screen. This makes it easy to detect poorly performing hard disk drives. The required software is suitable for Windows PCs and is supplied free of charge.
The Log Report Management function makes it possible to view and save detailed information about the production process. The Log information can be viewed and exported directly via the supplied PC Link software (.txt, .csv, .xml or .pdf) or copied on a USB stick (.txt) on the system.
The "Quick Copy" function only duplicates the existing data area on an NTFS, Linux (ext2/ext3/ext4) FAT16/32 or exFAT partition. The duplication process can be accelerated considerably in most cases. Other not supported data formats can also be duplicated with the "Whole Media" copy function. This will duplicate the entire content in a bitwise operation.
The U-Reach erasers support different sanitization methods for hard disk drives and SSD's: Quick Erase: Only overwrite FAT. Full Erase: Overwrite the entire data carrier. DoD Erase: Multiple cycles, complies with the US Department of Defence 5220.22-M standard. Secure Erase: A NIST 800-88 supported method to securely sanitize modern drives (HDD and SSD).
The U-Reach SATA duplicators support the use of optional adapters for connecting additional interfaces. This makes it possible to use more than one media standard. Adapters are available for:
- IDE
- eSATA, mSATA and Micro SATA
- M.2 (NGFF)
- CFast Card
Model
U-Reach IT-G 1-15 HDD/SSD duplicator
Product code
IT1500G
EAN code
4717002698130
SATA ports
1x source port, 15x target port
Speed
Maximum 150 MB/s (9 GB/min) per SATA port (depending on media)
Capacity
Supports Advanced Format HDD (15 TB+) and GPT, MRB table format
Connection
- Standalone operation without computer or software - Supports PC link for real-time monitoring and log report
Language support
English, Japanese
Operation
- Display: monochrome LCD
- Status LED: (red / green) on each SATA port
- Operation keys: 4 push buttons (up, down, OK, ESC)
Supported media
- Native: 1.8"/2.5"/3.5" SATA hard disk drive and SSD
- With optional adapters: 2.5"/3.5" IDE hard disk drive, mSATA SSD, microSATA, eSATA, iVDR
Standard functions
- Copy: Quick Smart Copy, All Partitions Copy, Percentage Copy and Whole HDD Copy
- Compare: Bit by Bit data compare
- Erase: Quick Erase, Full Erase , DoD Erase (DoD 5220.22-M), Secure Erase (NIST 800-88)
- Diagnostic: Check Source Minimum Speed, Unknown Format, Minimum Speed
Advanced functions
- PC Monitoring:
USB connection to PC shows write speeds, copy times and progress percentage per port
- Event Log Report:
Registration and read back of detailed production information Log report files are created and saved on a USB stick
Supported formats
- Quick Copy: FAT16/32, exFAT, NTFS, Linux (Ext2/Ext3/Ext4), MAC (HFS, HFSX, HFS+)
- Whole Media Copy: all formats
Supported file systems
All (Windows, Macintosh, Linux, Unix etc.)
Power supply
Switchable power supply 115VAC or 230VAC, 50/60Hz
Temperature and humidity
- In use: 5°C ~ 45°C (RH: 20% ~ 80%)
- Not in use: -20°C ~ 85°C (RH: 5% ~ 95%)
Dimensions
47,0 x 48,0 x 27,0 cm (LxWxH)
Weight
7,0 kg
Certification
FCC, CE, RoHS
Warranty
12 months carry-in warranty
Brochure Language: EN - File: 0.8 MB
Manual Language: EN - File: 2.0 MB
Product comparison Language: EN - File: 0.5 MB
U-Reach Product Catalog 2021 Language: EN - File: 5.2 MB
All prices and specifications are subject to change and availability.
All offers and orders are subject to our general terms and conditions. Please take note of our disclaimer and
privacy policy. Type errors as well as price changes reserved.
×
Maximum copy speed
U-Reach SATA duplicators are able to simultaneously duplicate at a maximum speed of 9 GB/min to each SATA port. The speed always remains constant, even if the number of media to be duplicated increases.
×
Real-Time PC Monitoring
The PC Monitoring function makes it possible to monitor the status and progress of the current process in real-time. The information of each port is shown on the PC screen. This makes it easy to detect poorly performing hard disk drives. The required software is suitable for Windows PCs and is supplied free of charge.
1. Monitor the duplicator status from PC.
2. Show brand, model, serialnumber, time to proces and result of each port. All information, from both source and target media, can be saved.
3. Slow read/write detection: slow preforming drives can simply be detected because all read/write speeds are recorded in the log file.
4. When exporting a log file you can select a time frame. Information is stored in a text (.txt) file and can be kept on a PC. File name is the export date. (example: 20181117.txt)
×
Log Report Management
The Log Report Management function makes it possible to view and save detailed information about the production process. The Log information can be viewed and exported directly via the supplied PC Link software (.txt, .csv, .xml or .pdf) or copied on a USB stick (.txt) on the system.
×
Quick Copy
The "Quick Copy" function only duplicates the existing data area on an NTFS, Linux (ext2/ext3/ext4) FAT16/32 or exFAT partition. The duplication process can be accelerated considerably in most cases. Other not supported data formats can also be duplicated with the "Whole Media" copy function. This will duplicate the entire content in a bitwise operation.
×
Sanitization
The U-Reach erasers support different sanitization methods for hard disk drives and SSD's: Quick Erase: Only overwrite FAT. Full Erase: Overwrite the entire data carrier. DoD Erase: Multiple cycles, complies with the US Department of Defence 5220.22-M standard. Secure Erase: A NIST 800-88 supported method to securely sanitize modern drives (HDD and SSD).
×
Optional Adapters
The U-Reach SATA duplicators support the use of optional adapters for connecting additional interfaces. This makes it possible to use more than one media standard. Adapters are available for:
- IDE
- eSATA, mSATA and Micro SATA
- M.2 (NGFF)
- CFast Card
×
Cable free SATA
With "Cable Free SATA" you can simply plug a SSD or HDD (1.8"/2.5"/3.5") directly into each SATA bay connector on the system. No need for extra cables or adapters.
HDD/SSD Duplicator IT-G 1-15
